Equipment

Bowling Ball Maintenance: Cleaning, Resurfacing and Oil Extraction

A practical bowling ball maintenance routine for Storm and other reactive balls: wiping, cleaning at home, resurfacing, removing lane shine and oil extraction.

On this page
  1. Why reactive balls need maintenance
  2. A simple maintenance schedule
  3. Wiping and cleaning
  4. Resurfacing
  5. Oil extraction
  6. Plastic and urethane balls
  7. Storage and temperature
  8. Following your manufacturer’s guidance (Storm and others)

Why reactive balls need maintenance

Every time a ball rolls down the lane, it picks up lane oil and dirt. Plastic balls shrug most of this off, but reactive resin covers — the kind on most performance balls from Storm, its sister brands Roto Grip and 900 Global, and every other major manufacturer — are designed to grip the lane, and that also means they absorb oil.

Over time, three things happen:

  1. Oil builds up on and in the coverstock, so the ball skids farther and hooks less.
  2. The surface gets smoothed by the lane (“lane shine”), especially along the track where the ball contacts the lane.
  3. Dirt and residue dull the surface unevenly, making the reaction less predictable.

A simple routine slows all three down and keeps the ball close to how it reacted out of the box.

A simple maintenance schedule

When What to do
Between shots Wipe the ball with a clean microfiber towel or shammy
After every session Clean with a bowling-ball cleaner
Every few dozen games Refresh the surface back to its factory finish
Roughly once or twice a season, or when reaction fades Pro shop resurface and oil extraction

The exact intervals depend on how often you bowl, how heavy the oil is at your center and the ball itself. Treat these as starting points and adjust based on how your ball is reacting.

Wiping and cleaning

During play

Wipe the ball with a microfiber towel before each shot to remove oil left from the previous one. Rotate to a clean section of the towel, and replace or wash the towel regularly; an oil-soaked towel just moves oil around.

If you bowl in USBC-certified leagues or tournaments, be aware that the rules restrict what you can do to a ball’s surface during competition. In recent seasons that has meant no ball cleaners or abrasives once play begins — only a towel. Rules are updated from time to time, so check the current USBC rulebook or ask your league secretary.

How to clean a bowling ball at home

After each session:

  1. Use a cleaner made for bowling balls. Most manufacturers, Storm included, sell their own. USBC maintains a list of approved cleaners, which matters if you clean during practice before competition.
  2. Spray and wipe. Apply the cleaner to the ball or a clean towel, then wipe the whole surface firmly, not just the track.
  3. Dry it off with a fresh section of towel.
  4. Clean the holes gently with a dry cloth or cotton swab.

Avoid household solvents. Some bowlers use isopropyl alcohol as a degreaser, but strong solvents such as acetone can damage a coverstock, and household cleaners may leave residue. When in doubt, use the manufacturer’s product.

Resurfacing

What the factory finish means

Every reactive ball leaves the factory with a specific surface — for example, a dull finish sanded with a particular pad grit, or a polished finish. Manufacturers list this on the ball’s spec sheet, often called the box finish or factory finish. Many bowlers use pads (such as Abralon-style pads in grits like 500, 1000, 2000 and 4000) to match it.

The finish matters because it controls how early the ball grips:

  • Duller (lower grit) surfaces grab the lane sooner and give a smoother, earlier hook.
  • Shinier (higher grit or polished) surfaces skid farther before hooking.

How often should you resurface?

There’s no single answer, but common guidance is to refresh the surface back to the factory finish every few dozen games — somewhere in the range of 30 to 60 games is often suggested for balls used regularly — with a full pro shop resurface less often. Check your manufacturer’s recommendation, and pay attention to the ball: if it’s skidding farther or the track looks noticeably shinier than the rest of the cover, it’s time.

How to remove lane shine

Lane shine is the polished-looking band where the ball rolls on the lane. To remove it:

  1. Clean the ball first so you aren’t grinding oil and dirt into the cover.
  2. Identify the factory finish from the spec sheet.
  3. Sand the whole ball evenly with the matching pad, working in overlapping strokes or with the ball on a spinner, and use water if the pad calls for it.
  4. Finish with the final grit of the factory finish, and polish only if the ball came polished.
  5. Clean again to remove dust.

A pro shop can do this on a resurfacing machine, which gives a more even result, especially if the ball has deep lane shine or track flare rings.

Oil extraction

Signs a ball is oil-soaked

  • The ball hooks noticeably less than it used to, even after cleaning and resurfacing.
  • Oil “sweats” out of the cover after you leave it somewhere warm.
  • Dark, blotchy patches in the track area.

Pro shop extraction vs home methods

Most pro shops have an oil extraction unit that gently warms the ball to draw oil to the surface, then wipes it off. It’s generally the safest method because the temperature is controlled.

Some bowlers use home methods such as soaking the ball in hot tap water (with the finger and thumb holes taped over), then wiping off the oil. If you try this, keep the water hot rather than boiling, and never use an oven, dishwasher, microwave or a car parked in the sun. Rapid or extreme temperature changes can crack a ball, and heat can loosen the adhesive on finger inserts and thumb slugs. If the ball is valuable to you, the pro shop is the lower-risk option.

Plastic and urethane balls

  • Plastic spare balls need little more than a wipe and occasional cleaning; they don’t absorb much oil.
  • Urethane balls absorb less oil than reactive resin but still benefit from regular cleaning and surface refreshes.

Storage and temperature

  • Store balls at room temperature, away from direct sunlight, heaters and freezing garages.
  • Don’t leave them in a car trunk for long periods, especially in hot or cold weather.
  • If a ball has been in the cold, let it warm up to room temperature before you bowl with it.
  • A simple rack keeps balls stable and off the floor; see how to make a bowling rack for DIY options.

Temperature also matters when traveling; flying with bowling balls and pins covers packing balls for the cargo hold.

Following your manufacturer’s guidance (Storm and others)

Storm and other manufacturers publish their own maintenance recommendations, and some warranties may depend on following them. The core routine is similar across brands: wipe often, clean after every session, keep the surface at its intended finish, and get oil extracted when the reaction fades.

If you rotate several balls, good maintenance also keeps them doing distinct jobs — a sanded strong ball that slowly shines up can start to overlap with your benchmark. Our guide to building a bowling ball arsenal explains why that spacing matters.

The complete guide to equipment

Bowling Equipment Guide: What You Need and Standard Measurements
Read the guide

Keep exploring

Guides from other topics

All topics →