Equipment

Bowling Ball Grips, Inserts and Slugs Explained

Which fingers go in a bowling ball, the main grip styles, and how finger inserts, thumb inserts and thumb slugs change the fit and feel of your ball.

On this page
  1. Which fingers go in a bowling ball?
  2. The main types of bowling grips
  3. Grip fit basics: span, pitch and bridge
  4. Finger inserts
  5. Thumb inserts and thumb slugs
  6. Can you get interchangeable grips?
  7. Caring for inserts and slugs
  8. Working with a pro shop

Which fingers go in a bowling ball?

A standard bowling ball has three holes: one for your thumb and two for your middle and ring fingers. Your index finger and little finger rest on the outside of the ball, usually spread a little for balance.

The thumb goes in fully. How far the two fingers go in depends on the grip style, which is the first thing a pro shop will ask about when drilling a ball.

The main types of bowling grips

Conventional grip

The middle and ring fingers go in to the second knuckle. This is the grip on almost every house ball.

  • Pros: Secure and easy to control; a good choice for beginners, straight bowlers and spare balls.
  • Cons: Because the fingers are deep in the ball, it’s harder to generate a lot of rotation (revs).

Fingertip grip

The fingers go in only to the first knuckle, and the holes are drilled farther apart to make this possible. The thumb still goes in fully.

  • Pros: The thumb tends to leave the ball earlier and the fingers later, which helps most bowlers create more revs and hook. It’s the standard grip for reactive performance balls.
  • Cons: It takes more hand strength and practice to control, and it puts more load on the finger joints at first.

Semi-fingertip and split grips

A semi-fingertip grip puts the fingers in somewhere between the first and second knuckles. It’s less common today but some bowlers find it a comfortable middle ground.

There are also split or hybrid grips, such as the Sarge Easter grip, where one finger goes in conventionally and the other at the fingertip. These are usually suggested by a driller to solve a specific comfort or release problem rather than chosen at random.

Two-handed and thumbless

Many two-handed bowlers don’t put their thumb in the ball at all, using only the two fingers. Some still have a thumb hole drilled (for spares or for flexibility), while others leave it out. “Thumbless” one-handed bowling also exists but is rare.

Grip fit basics: span, pitch and bridge

Grip style is only half the fit. Pro shop operators also measure:

  • Span: the distance from the thumb hole to each finger hole. Too long and you’ll squeeze; too short and the hand feels cramped.
  • Pitch: the angle of each hole relative to the center of the ball. Pitch affects how easily the thumb and fingers release and how much you need to grip.
  • Bridge: the width of ball surface between the two finger holes.
  • Hole size: each hole is sized to the individual digit, often in fractions of an inch.

A ball that fits well lets you hold it with a relaxed hand. That’s the main reason a drilled ball usually feels lighter and more controllable than a house ball of the same weight.

Finger inserts

Finger inserts are short, soft sleeves (typically urethane or rubber compounds) glued into the finger holes. The hole is drilled slightly oversize, the insert goes in, and the opening is sized to your finger.

Why bowlers use them:

  • Grip and feel: The softer material gives a little more traction, so you don’t need to squeeze as hard.
  • Consistency: Inserts can help the fingers grab the ball late in the release, which many fingertip bowlers like.
  • Comfort: They’re kinder on skin than drilled ball material.

Inserts come in different textures, shapes (round, oval) and firmness levels. They wear out over time and get replaced, usually inexpensively, at a pro shop.

Thumb inserts and thumb slugs

The thumb hole has two common options beyond bare drilled material: thumb inserts and thumb slugs.

What is a slug for a bowling ball?

A thumb slug is a solid cylinder of plastic or urethane. The pro shop drills a larger hole in the ball, glues the slug in, and then drills your thumb hole inside the slug — size, pitch and shape included.

Because the thumb hole is cut into the slug rather than the ball itself, a worn or badly fitting thumb hole can be fixed by drilling out the old slug and putting in a new one, often without plugging and redrilling the ball. Slugs also give a smooth, consistent surface on every ball you own.

Thumb inserts

A thumb insert (sometimes called a pre-sized thumb) is a hollow sleeve that already has a thumb-sized opening. It’s glued into an oversized hole and comes in set sizes, often with options for oval or more unusual shapes.

Slug vs insert: which do you need?

Thumb slug Pre-sized thumb insert
How it’s sized Driller cuts the hole to your thumb Comes in fixed sizes
Fit precision Very precise, including pitch and shape Good if a stock size matches your thumb
Feel Smooth, consistent across balls Smooth, consistent across balls
Changing it Drill out and replace Pull out and replace

Many bowlers with multiple balls use slugs so every thumb hole feels identical. Others are happy with a stock insert. A good driller can tell you which suits your thumb.

Can you get interchangeable grips?

Partly. Several manufacturers make interchangeable thumb systems: a permanent sleeve sits in the ball, and the thumb piece itself can be removed and swapped. Bowlers use these to move one thumb fit between balls or to switch thumb sizes as their thumb swells or shrinks.

For the fingers, inserts are generally glued in and replaced rather than swapped in and out during a session. If your fingers change size during play, tape is the usual quick fix.

Caring for inserts and slugs

  • Check for wear. Torn, flattened or hardened finger inserts lose grip. Many regular bowlers replace them every few months.
  • Keep them clean. Wipe out oil and dirt; follow the general routine in bowling ball maintenance, and be cautious with heat, which can loosen the glue holding inserts and slugs.
  • Use tape for daily fit changes. Bowler’s tape inside the thumb hole adjusts for swelling without redrilling.
  • Watch for blisters or soreness. Persistent pain or calluses usually mean the fit needs adjusting.

A note on layouts: since 2020, USBC rules no longer allow balance holes, which drillers once used to fine-tune a ball’s static weight. Your driller handles this, but it’s why some older balls have an extra hole that a newly drilled ball won’t.

Working with a pro shop

Grips, inserts and slugs are all pro shop jobs. When you go:

  • Tell the driller your grip preference (or ask for advice if you’re new).
  • Mention any hand issues, such as arthritis, past injuries or a thumb that tends to swell.
  • Bring your current ball if you like how it feels; the driller can copy or improve its fit.

If you’re also deciding which ball to have drilled, see how to know what ball to use in bowling. For the bigger picture of what else goes in your bag, our bowling equipment guide covers the full list.

The complete guide to equipment

Bowling Equipment Guide: What You Need and Standard Measurements
Read the guide

Keep exploring

Guides from other topics

All topics →