Equipment

Bowling Equipment Guide: What You Need and Standard Measurements

What you need to bowl, from balls and shoes to towels and bags, plus the standard ten-pin measurements for balls, pins and lanes in one reference guide.

On this page
  1. What you need to bowl (the short answer)
  2. The bowling ball
  3. Bowling shoes
  4. Bowling pins and their measurements
  5. The lane, approach and pin deck
  6. The pinsetter: the machine behind the pins
  7. Accessories worth knowing about
  8. Rent, borrow or buy?
  9. A note on other forms of bowling

What you need to bowl (the short answer)

For a casual game, you need very little: a pair of bowling shoes and a ball. Most bowling centers rent shoes at the front desk and keep racks of shared “house balls” free to use, so a first-timer can walk in empty-handed.

Once you bowl regularly, the list grows a little. Most league bowlers own:

  • Bowling shoes with a slide sole and a braking sole
  • At least one ball drilled to fit their hand, often plus a plastic spare ball
  • A bag to carry it all
  • A microfiber towel to wipe oil off the ball between shots

Everything else — tape, cleaners, wrist supports, gloves, grip aids — is optional and depends on your game. The rest of this guide walks through each piece of equipment and lists the standard measurements for ten-pin bowling, so you know what you’re working with on the lanes.

The bowling ball

Ball measurements and weight limits

Under United States Bowling Congress (USBC) specifications, a ten-pin ball:

  • Must not weigh more than 16 pounds. There is no official minimum, and balls are widely sold from about 6 pounds up.
  • Has a diameter of roughly 8.5 to 8.6 inches (8.500 to 8.595 inches).
  • Has a circumference between about 26.7 and 27.0 inches (26.704 to 27.002 inches).

In other words, every regulation ball is essentially the same size. What changes from ball to ball is the weight, the material of the outer shell, and the shape of the weight block inside.

What bowling balls are made of

A modern ball has two main parts: the coverstock (the outer shell that touches the lane) and the core (the weight block inside), with filler material in between.

Common coverstock materials:

  • Plastic (polyester): Hard and smooth, it grips the lane very little, so it rolls fairly straight. Most house balls and spare balls are plastic.
  • Urethane: Grips more than plastic and gives a smoother, more controlled curve.
  • Reactive resin: A urethane-based material with additives that help it grip through lane oil, producing more hook. Most performance balls are reactive resin, in solid, pearl or hybrid versions.
  • Particle: Reactive covers with added particles for extra traction on heavy oil, now a smaller niche.

Plastic house balls often have a simple core, while performance balls use shaped cores (symmetrical or asymmetrical) that change how the ball revs up and turns. You can read more about matching these to your game in how to know what ball to use in bowling.

How to pick a ball size

Since every ball has the same diameter, “ball size” really means two things: weight and fit.

  • Weight: A widely repeated rule of thumb is about 10% of your body weight, capped at 16 pounds. Treat this as a starting point, not a rule. The right weight is the heaviest ball you can swing smoothly and repeatably for a full session without strain.
  • Fit: Your thumb should slide in and out without sticking or wobbling, and the span to the finger holes should feel comfortable rather than stretched or cramped. House balls only approximate this; a pro shop can drill a ball to your exact measurements. Our article on bowling grips, inserts and slugs explains grip styles and fit terms such as span and pitch.

Bowling shoes

Bowling shoes look ordinary but work differently from street shoes. On a typical pair, the slide shoe (the left shoe for right-handed bowlers) has a smooth sole that lets you glide into the foul line, while the push-off shoe has a rubber sole for traction. Both have a heel that helps you stop.

Centers require bowling shoes partly for safety and partly to keep grit and water off the approach. Rental shoes are fine for occasional bowling, but if you bowl often, owning a pair is usually worth it — see do you need your own bowling shoes for the trade-offs.

Higher-end shoes let you swap soles and heels to fine-tune your slide. That system is explained in interchangeable bowling shoe soles and heels.

Bowling pins and their measurements

Ten-pin bowling pins are made mainly from hard maple, usually glued up from several blocks, then shaped and covered with a tough plastic coating. Synthetic pins also exist.

Approximate USBC specifications for a ten-pin pin:

Measurement Standard
Height 15 inches
Weight 3 lb 6 oz to 3 lb 10 oz
Widest point (the “belly”) about 4.75 inches across
Spacing 12 inches between pin centers
Arrangement 10 pins in a triangle of 4 rows

The pins stand on the pin deck, with the headpin (the 1-pin) closest to the bowler.

The lane, approach and pin deck

You won’t own a lane, but it’s part of the equipment of the game, and knowing its layout helps when you start aiming.

Lane measurements at a glance

Feature Standard (ten-pin)
Foul line to center of headpin 60 feet
Lane width about 41.5 inches
Number of boards 39
Approach length (behind the foul line) at least 15 feet
Gutters (channels) roughly 9 inches wide on each side
Targeting arrows 7 arrows, typically around 15 feet past the foul line

Traditional wood lanes used maple at the front and back (where impact is heaviest) and pine in the middle. Many centers now use synthetic lane surfaces. In both cases, the lane is coated with a lane conditioner (oil) laid down in a pattern, which affects how much a ball hooks.

The dots on the approach and the arrows on the lane are aiming aids. Bowlers count boards from the right edge (for right-handers) and use the arrows as targets rather than looking at the pins.

The pinsetter: the machine behind the pins

The machine that collects knocked-down pins, resets them and returns your ball is called a pinsetter (AMF has long used the name “pinspotter”). There are two broad types:

  • Free-fall pinsetters, the traditional machines that sweep, collect and drop pins into place
  • String pinsetters, where each pin is attached to a cord; these are cheaper to run and have become more common in recent years, though some bowlers notice differences in pin action

The ball travels back to you through an underground track and up the ball return.

Accessories worth knowing about

Bags

Bags come in single-ball totes, double totes and two- or three-ball rollers with wheels. A roller is easier on your shoulders once you carry more than one ball. If you’re building a bigger bag, our guide to building a bowling ball arsenal explains how many balls most bowlers actually need.

At home, balls are best stored somewhere stable and at room temperature; how to make a bowling rack covers a few simple DIY options.

Towels, cleaners and grip aids

  • Microfiber towel or shammy: Wipes oil off the ball between shots. This is the one accessory almost every regular bowler carries.
  • Ball cleaner: Removes oil and dirt after a session. Use a product approved for bowling balls. See bowling ball maintenance for a full cleaning and resurfacing routine.
  • Rosin bag or grip sack: Helps keep your hand dry for a more consistent release.

Tape, inserts and wrist supports

  • Bowler’s tape goes inside the thumb hole to fine-tune fit, especially when your thumb swells or shrinks during a session.
  • Finger inserts and thumb slugs are fitted by a pro shop to change the feel and fit of the holes.
  • Wrist supports and gloves help some bowlers keep a steady wrist position. Whether they’re worth it depends on your goals — see do bowling wrist supports actually help.

For bowlers who are blind or have low vision, a guide rail on the approach is a key piece of adaptive equipment; see bowling rails and adaptive equipment.

Rent, borrow or buy?

A sensible order for most new bowlers:

  1. Rent and borrow for your first few visits. Use rental shoes and pick a house ball that fits reasonably well.
  2. Buy shoes first if you start bowling regularly. They’re relatively affordable, more hygienic, and you get the same slide every time.
  3. Buy a ball drilled for your hand once you’re committed — the fit alone often makes a bigger difference than the ball’s cover or core.
  4. Add accessories as needed: a towel and bag almost immediately, then tape, a spare ball or a second ball as your game develops.

If you travel to tournaments, check the rules before you pack; flying with bowling balls and pins covers what TSA allows in carry-on and checked bags.

A note on other forms of bowling

The measurements in this guide apply to ten-pin bowling as governed by the USBC and similar bodies elsewhere. Other forms use very different equipment. Duckpin and candlepin bowling use small, hand-held balls without finger holes and differently shaped pins, and five-pin bowling (popular in Canada) uses smaller balls and five pins with rubber bands. If you’re bowling one of those, check that format’s own governing rules.

Keep exploring

Guides from other topics

All topics →