Scoring and Formats

How Bowling Handicap Works and How It's Calculated in Leagues

Bowling handicap gives bonus pins based on the gap between your average and a basis score. See the formula, worked examples and how team handicap works.

On this page
  1. What handicap is for
  2. The basic formula
  3. Step-by-step example
  4. Common handicap formulas
  5. What if your average is higher than the basis?
  6. Rounding: dropping fractions
  7. Team handicap
  8. When handicap changes during a season
  9. New bowlers, absent bowlers and vacancies
  10. Scratch vs handicap leagues
  11. Sandbagging and why leagues watch for it

What handicap is for

Handicap lets bowlers of different skill levels compete on roughly even terms. Each bowler gets a number of bonus pins added to every game, based on how far their average sits below a set target called the basis (or base). A 140 bowler and a 200 bowler can then have a real match, because the lower-average bowler starts with more pins.

Handicap doesn’t make games equal every week. It closes the average gap, so whoever bowls better than their own average that night has the edge.

The basic formula

Most leagues use this formula:

Handicap = (basis − your average) × percentage

The league picks both numbers and puts them in its rules. Common choices include 90% of 220, 80% of 220, 90% of 210, 80% of 200 and 100% of 200.

Your handicap is added to your actual score (your “scratch” score) each game:

Handicap score = scratch score + handicap

Step-by-step example

Your league uses 90% of 220, and your average is 160.

  1. Find the gap: 220 − 160 = 60.
  2. Apply the percentage: 60 × 0.90 = 54.
  3. Your handicap is 54 pins per game.

If you bowl a 171, your handicap score is 171 + 54 = 225.

A second bowler with a 185 average in the same league: 220 − 185 = 35, and 35 × 0.90 = 31.5. With the fraction dropped, that’s 31 pins.

You’ll need an accurate average first. If you’re not sure how that’s worked out, see how to calculate your bowling average.

Common handicap formulas

Here’s what the same three bowlers would get under different formulas (fractions dropped):

Formula 140 average 170 average 200 average
90% of 220 72 45 18
80% of 220 64 40 16
90% of 210 63 36 9
80% of 200 48 24 0
100% of 200 60 30 0

Higher percentages and higher bases give lower-average bowlers more help. 100% handicap fully closes the average gap up to the basis, while 80% or 90% leaves the stronger bowler a small edge, which many leagues consider fairer to the bowler who has put in the work.

What if your average is higher than the basis?

In most leagues, a bowler whose average is at or above the basis simply gets zero handicap. Handicap isn’t usually subtracted. That’s one reason leagues with many high-average bowlers tend to pick a higher basis, such as 220 or 230, so that most of the league still receives some handicap.

Rounding: dropping fractions

Handicap math often produces decimals. The common practice is to drop the fraction, so 31.5 becomes 31 and 22.9 becomes 22. Some leagues round instead. The difference is usually a pin, but it can matter in a close match, so it’s worth confirming how your league does it.

Remember that the average going into the formula should already have its fraction dropped too.

Team handicap

Team matches use handicap in one of two main ways. Your league’s rules will say which.

Summing individual handicaps

Each bowler’s handicap is calculated as above, and the team’s handicap is the total. A four-person team with averages of 150, 170, 185 and 200 in a 90%-of-220 league would get:

  • 150 average: 70 × 0.9 = 63
  • 170 average: 50 × 0.9 = 45
  • 185 average: 35 × 0.9 = 31.5, so 31
  • 200 average: 20 × 0.9 = 18

Team handicap: 63 + 45 + 31 + 18 = 157 pins per game.

Team-vs-team difference method

Some leagues instead compare the two teams’ combined averages directly and give only the lower team a handicap, equal to a percentage of the difference. If Team A’s averages total 705 and Team B’s total 760, the difference is 55. At 90%, that’s 49.5, so Team A gets 49 pins and Team B gets none.

The first method is easier to apply across a whole league, because each team’s handicap doesn’t depend on who it’s bowling that week.

When handicap changes during a season

Because your average changes as you bowl, your handicap changes too. Most leagues recalculate it each week, using your average through the previous week. Your handicap for a given night stays the same for every game that night.

Early in the season, averages bounce around, so handicaps can shift by several pins from week to week. They settle as more games are bowled.

New bowlers, absent bowlers and vacancies

  • New bowlers with no established average usually bowl their first games with a handicap based on a temporary or entering average, or their handicap is worked out after the first night. The details vary, so new bowlers should ask the league secretary.
  • Absent bowlers are often given a “blind” or absentee score, typically their average minus a set number of pins, plus their handicap. The penalty discourages teams from benefiting from a missing player.
  • Vacancies, where a team has an empty roster spot, are usually filled with a fixed vacancy score set in the league rules.

These scores normally count toward the team total but not toward the absent bowler’s personal average.

Scratch vs handicap leagues

  • Handicap leagues are the most common recreational format. They welcome mixed skill levels and give newer bowlers a real chance to win.
  • Scratch leagues use actual scores only. They’re usually made up of higher-average bowlers who want straight-up competition.

Some leagues award prizes in both: a scratch high game and a handicap high game, for example. Handicap also shows up outside league matches, especially in bowling brackets and sidepots, where handicap brackets are a common option.

Sandbagging and why leagues watch for it

Because a lower average means more handicap, a bowler can be tempted to bowl below their ability early in a season to build up handicap. In bowling slang, that’s called sandbagging. Leagues use a few tools to discourage it, such as using last season’s average as the entering average, setting a minimum number of games before an average is established, or allowing the league to adjust a bowler’s average. If you’re curious about other league slang like this, see our list of common bowling slang terms.

The complete guide to scoring and formats

How Bowling Scoring Works: Frames, Strikes and Spares
Read the guide

Keep exploring

Guides from other topics

All topics →