Two very different games share the name
“Nine-pin bowling” refers to two distinct traditions:
- European nine-pin, also called ninepins, kegel or kegeln, is an organized sport with national leagues and international championships. It’s most common in Germany, Austria, Czechia, Slovakia, Hungary, Croatia, Slovenia, Serbia and neighbouring countries, and the international body is the World Ninepin Bowling Association.
- American (Texas) nine-pin is a much smaller, community-based game that survives mainly in clubs in parts of central Texas with German heritage.
They share nine pins in a diamond, and not a lot else. The equipment below is split accordingly.
European nine-pin (kegeln) equipment
The pins and the diamond setup
The nine pins are arranged in a square turned 45 degrees, so it looks like a diamond from the bowler’s position: one pin at the front point, rows of two, three and two, and one pin at the back point. The pin in the very centre is often called the king pin (in German, König), and in some traditions it’s marked or shaped a little differently from the others.
The pins are smaller than ten-pin pins, and in modern installations they hang from strings (see pinsetters below).
The ball
The standard ball is about 16 cm (roughly 6.3 in) in diameter and weighs around 2.8 to 2.9 kg (about 6.3 lb). A smaller, lighter ball is used by younger and novice players. Unlike a ten-pin ball, a regulation nine-pin ball has no finger holes; you hold it in the hand. Special balls with two finger holes are available for beginners and recreational players.
The lanes: classic, Bohle and Schere
European nine-pin has three lane styles, each with its own regional following:
| Lane type | Approximate length | Shape |
|---|---|---|
| Classic (asphalt) | 19.5 m (about 64 ft) | Same width the whole way; the most common type and the one used for most international competition |
| Bohle | 23.5 m (about 77 ft) | A narrow, slightly concave strip that rises a little toward the pins; most common in parts of northern Germany |
| Schere (“scissors”) | 18 m (about 59 ft) | Starts as a narrow strip, then widens toward the pin deck like a pair of scissors |
String pinsetters
Most European nine-pin lanes use string pinsetters. Each pin hangs from a cord. After a throw, the machine pulls the strings to lift the pins, then lowers them back into position. This is mechanically simpler than the free-fall pinsetters common in ten-pin bowling, which pick up, sort and drop loose pins.
The trade-off is that strings can slightly affect how pins fall and scatter. In nine-pin, the game has developed around string machines, so that’s simply part of the sport.
American (Texas) nine-pin equipment
The Texas game looks much closer to ten-pin bowling:
- Lanes: standard ten-pin lanes, often kept dry or with very little oil.
- Balls: regular ten-pin balls with finger and thumb holes.
- Pins: ten-pin-sized pins, set in a diamond of nine instead of a triangle of ten.
- Pinsetting: traditionally done by hand by pinsetters working at the back of the lane, rather than by machine.
- Scoring: usually kept by hand, with a team-based scoring system quite different from ten-pin.
Because bowlers on a team take turns at the same rack, Texas nine-pin rewards specialists: some bowlers are known for picking off the left side, others the right.
Side-by-side comparison
| European nine-pin | Texas nine-pin | Ten-pin (for reference) | |
|---|---|---|---|
| Pin arrangement | 9 in a diamond | 9 in a diamond | 10 in a triangle |
| Pins | Smaller, on strings | Ten-pin size | Standard ten-pin |
| Ball | About 16 cm, no holes | Drilled ten-pin ball | Drilled ten-pin ball |
| Lane | Classic, Bohle or Schere | Ten-pin lane | Ten-pin lane, oiled |
| Pinsetter | String machine | Usually by hand | Free-fall or string machine |
| Organization | National federations, world body | Local clubs | Leagues worldwide |
Equipment names you’ll hear
- Ball (Kugel in German): the holeless ball in European play.
- Pins (Kegel): the nine pins; the centre pin is the king.
- Pin deck or pin field: the area at the end of the lane where pins stand.
- Pinsetter: the machine (or person, in Texas) that resets pins.
- Ball return: the track that sends the ball back to the bowler.
- Approach: the area where bowlers take their steps before releasing.
- Foul line: the line bowlers must not cross during delivery.
How much does a nine-pin pinsetter cost?
There isn’t a reliable public price list. Costs depend on whether the machine is new or used, the manufacturer, the number of lanes, installation, and the scoring system and software that go with it. Manufacturers generally quote per project. For ten-pin equipment, see our breakdown of what a pinsetter machine costs.
In general terms, string pinsetters are usually described as cheaper to run and maintain than free-fall pinsetters, because they have fewer moving parts. If you’re pricing a project, request quotes from several manufacturers and ask about servicing and parts availability in your area.
Home nine-pin lanes
Private nine-pin lanes do exist, particularly in German-speaking countries, where some homes, clubs and inns have their own Kegelbahn. A home installation needs the lane surface, pinsetter, ball return, lighting, a scoring system and enough room for the lane plus approach. Expect a project like this to require professional planning and installation.
A note on the “illegal” story
A popular story says nine-pin bowling was outlawed in the 19th-century United States, and that ten-pin bowling was invented to get around the ban. The real history is a bit messier. Our article on whether nine-pin bowling is still illegal covers what’s known.
If you’re more familiar with ten-pin, our guide to how ten-pin bowling scoring works is a useful comparison. And for two other small-ball games with holeless balls, see five-pin bowling and duckpin bowling.