The short version
A game of ten-pin bowling has ten frames. In each frame you get up to two balls to knock down ten pins. Your score for a frame is the number of pins you knock down, plus bonuses:
- Strike (all ten pins on the first ball): 10 plus the pins from your next two balls.
- Spare (all ten pins using both balls): 10 plus the pins from your next one ball.
- Open frame (pins still standing after two balls): just the pins you knocked down.
The 10th frame gives you extra balls if you strike or spare, so the bonuses can be completed. A perfect game, twelve strikes in a row, scores 300.
Automatic scoring does all of this for you, but knowing how it works helps you understand why one strike can be worth far more than another, and lets you keep score when the monitors go down.
What a frame is
A frame is one turn at the lane. Each bowler bowls ten frames per game, and in frames 1 through 9 a frame ends in one of two ways:
- You throw a strike, which ends the frame after one ball.
- You throw two balls, whatever they knock down.
The 10th frame is different. If you strike or spare in it, you get one or two extra deliveries (often called fill balls) so the bonus for that frame can be counted. That’s why a game can have anywhere from 11 to 21 deliveries: 12 for a perfect game, up to 21 if you spare every frame and throw a fill ball at the end.
Open frames, spares and strikes
Open frame
If any pins are still standing after your second ball, the frame is “open.” You score the total pins knocked down. Knock down 7 then 2, and the frame is worth 9.
Spare
A spare means the second ball cleared whatever the first ball left. It’s worth 10 plus the pins knocked down by your next ball (the first ball of the following frame). Throw 6 then 4 for a spare, then 8 on the next ball, and the spare frame is worth 18.
Because the bonus depends on a ball you haven’t thrown yet, the score for a spare frame stays blank until that next ball is down.
Strike
A strike is worth 10 plus the pins from your next two balls, which may span one or two frames. A strike followed by 7 and 2 is worth 19. A strike followed by a spare is worth 20. A strike followed by two more strikes, a “turkey” in bowling slang, is worth the maximum 30.
This is why strings of strikes inflate scores so quickly: each strike in a row is counting the strikes that follow it. Our article on how many strikes you need to bowl a 200 shows how much more a back-to-back double is worth than two strikes spread apart.
The 10th frame and fill balls
In the 10th frame:
- Open frame: two balls, and the game is over.
- Spare: you get one more ball. The frame is worth 10 plus that ball.
- Strike: you get two more balls. The frame is worth 10 plus both of them.
The fill balls only exist to complete the 10th frame’s bonus. They don’t start an 11th frame. Three strikes in the 10th frame, sometimes called “striking out,” makes the frame worth 30.
The foundation frame
The foundation frame is bowling talk for the 9th frame. A strike there lays the foundation for a big finish: if you strike in the 9th and then strike out in the 10th, the last two frames can be worth up to 60 pins. A spare or open in the 9th caps what the 9th can be worth no matter how well you bowl in the 10th.
In league play the term often comes up when a match is close. Teammates will tell the bowler in the 9th to “get the foundation,” meaning a strike to keep the maximum possible score as high as it can be.
Score sheet symbols
Whether you’re reading the monitor or a paper sheet, you’ll see the same marks:
| Symbol | Meaning |
|---|---|
| X | Strike |
| / | Spare |
| - | A ball that knocked down no pins (a miss, or a gutter/channel ball) |
| F | Foul; the ball counts as zero |
| A number | Pins knocked down by that ball |
| Circled number (or a highlighted number on screens) | A split was left after the first ball |
Scorers often call strikes and spares “marks,” so a bowler who had a strike or spare in every frame has “all marks” or a “clean game.”
Worked example: scoring a full game by hand
Here’s a complete game. The second row shows the balls thrown, and the third shows the running total for each frame.
| Frame | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| Balls | X | 7 / | 9 - | X | X | X | 8 1 | 6 / | X | X 8 1 |
| Total | 20 | 39 | 48 | 78 | 106 | 125 | 134 | 154 | 182 | 201 |
Frame by frame:
- Strike, plus the next two balls (7 and 3): 10 + 7 + 3 = 20.
- Spare, plus the next ball (9): 10 + 9 = 19. Running total 39.
- Open, 9 and a miss: 9. Running total 48.
- Strike, plus the next two balls (both strikes): 10 + 10 + 10 = 30. Running total 78.
- Strike, plus the next two balls (a strike and the 8): 10 + 10 + 8 = 28. Running total 106.
- Strike, plus the next two balls (8 and 1): 10 + 8 + 1 = 19. Running total 125.
- Open, 8 and 1: 9. Running total 134.
- Spare, plus the next ball (a strike): 10 + 10 = 20. Running total 154.
- Strike, plus the next two balls (the strike and the 8 in the 10th): 10 + 10 + 8 = 28. Running total 182.
- Strike in the 10th, plus two fill balls (8 and 1): 10 + 8 + 1 = 19. Final score 201.
Notice the 9th frame: because it was a strike, it picked up 18 bonus pins from the 10th. That’s the foundation frame doing its job.
How to keep score manually, step by step
- Draw ten boxes, with a small box in the top corner of each for the second ball. Make the 10th frame wide enough for three balls.
- Write each ball as it happens. Use the number of pins, X for a strike, / for a spare, - for no pins, F for a foul.
- Fill in open frames right away. Add the frame’s pins to the previous total.
- Leave strikes and spares blank until you have the balls you need: one more ball for a spare, two more for a strike.
- Go back and fill in each pending frame as soon as its bonus balls are known. Several frames can be pending at once during a string of strikes.
- In the 10th frame, add fill balls only if the bowler struck or spared.
- Double-check by confirming each frame total minus the previous total is never more than 30.
A useful habit: after a spare, the pending score is “10 plus the next ball,” so you can say it out loud (“spare, waiting on one”) to keep track.
Fouls, splits and other scoring rules
- Foul. If a bowler crosses the foul line and touches the lane or beyond during a delivery, the delivery counts but scores zero. Under USBC rules, if the foul happens on the first ball, any pins it knocked down are respotted, and knocking all ten down with the second ball counts as a spare. If the foul happens on the second ball, only the pins from the first ball count.
- Split. A split is a leave after the first ball where the headpin is down and the pins left standing have at least one knocked-down pin between them, such as the 7-10. It’s marked on the sheet but doesn’t change the scoring; it just makes the spare harder.
- Pins that fall later. Pins knocked down by another pin, or that bounce off the side partition (the kickback) and fall, count. Pins knocked down by a ball that left the lane before reaching them, or by the pinsetter, don’t.
- Leagues and tournaments may have additional rules, such as how to score a ball delivered at the wrong lane. Ask the league secretary or check the USBC rulebook for the details.
Perfect game, clean game and other milestones
- 300: twelve strikes in a row, the highest possible score.
- Clean game: a strike or spare in every frame, with no open frames.
- Dutch 200: alternating strikes and spares across the whole game, landing on exactly 200.
- 190: the most you can score without a single strike, by spare-ing every frame with a 9 on the first ball.
The last two show how strikes and spares combine. Our breakdown of how many strikes it takes to bowl 200 works through the math frame by frame.
Over a season, these scores roll up into your average. To work yours out, see how to calculate your bowling average, and if your league is handicapped, how bowling handicap works explains how that average turns into bonus pins.
Current-frame scoring
The system above, where bonuses depend on future balls, is traditional scoring and what nearly every bowling center and league uses. Some international competition has experimented with a simpler “current frame” system, where a strike is worth a flat 30, a spare is worth 10 plus the first ball of the same frame, and an open frame is worth its pins. A perfect game is still 300, but scores are complete at the end of each frame. If you’re bowling in a center or league, assume traditional scoring unless told otherwise.
Quick answers
How many frames are in a game of bowling? Ten. The 10th frame can include one or two extra fill balls.
Are there 12 bowling pins? No. Ten-pin bowling uses ten pins in a triangle. The number 12 comes up because a perfect game takes twelve strikes: one in each of frames 1 to 9, plus three in the 10th.
What are the dimensions of a ten-pin bowling pin? Under USBC specifications, a pin is 15 inches tall and weighs between 3 lb 6 oz and 3 lb 10 oz. Pins are set 12 inches apart, center to center.
Does 9-pin bowling exist? Yes. It’s widely played in parts of Europe, and a different version survives in Texas. See our guide to nine-pin bowling equipment and setup.
Do other kinds of bowling score the same way? Not exactly. Five-pin bowling gives pins different point values and has a 450 perfect game, and duckpin bowling gives you three balls per frame. Both use the same strike-and-spare bonus idea.
What do all the nicknames mean? Turkey, hambone, Brooklyn, bedposts: our list of common bowling slang terms covers them.