The short answer
RG (radius of gyration) and differential describe how a bowling ball’s mass is arranged inside, mostly by the core:
- RG describes how easily the ball starts to rotate. A lower RG generally means the ball revs up sooner and reads the lane earlier. A higher RG generally means it skids longer before reacting.
- Differential is the difference between the ball’s highest and lowest RG. A higher differential means more flare potential, which usually means more hook. A lower differential means less flare and a straighter, more controlled path.
Both numbers are measured in inches, and USBC limits RG to 2.430–2.800 and differential to 0.060 or less.
What RG measures
RG is a measure of how far, on average, a ball’s mass sits from its axis of rotation.
A common analogy is a figure skater. With arms pulled in (mass near the center), the skater spins up quickly. With arms out (mass farther out), they spin up more slowly. A bowling ball works similarly:
- Low RG (mass concentrated toward the center): the ball revs up more readily and begins its transition earlier.
- High RG (mass spread toward the cover): the ball resists revving up, so it tends to go longer before it hooks.
In practice, low-RG balls are often chosen for heavier oil or for players who need the ball to start turning sooner. Higher-RG balls are often chosen for more length on drier or shorter patterns.
What differential measures
Each core has a high-RG axis and a low-RG axis. Differential is the gap between them. That gap creates the ball’s tendency to migrate from one axis to another as it rolls. Visually, you see this as track flare: the oil rings on the ball spreading apart instead of overlapping.
- High differential (for example, about 0.040–0.060): more flare potential, more exposure of fresh cover to the lane, and generally more hook.
- Low differential (for example, below about 0.030): less flare, a smoother and more predictable shape.
- Very low differential: typical of plastic balls with pancake weight blocks. See what is a 3-piece core bowling ball?
Typical numbers and legal limits
| Spec | USBC limit | Common range on performance balls |
|---|---|---|
| RG | 2.430–2.800 | Roughly 2.46–2.60 |
| Differential | 0.060 maximum | Roughly 0.010–0.060 |
Rough labels used by many bowlers:
- Low RG: around 2.46–2.50.
- Medium RG: around 2.50–2.54.
- High RG: around 2.55 and up.
These categories vary by source, and specs often differ by ball weight. Lighter balls in a line commonly have different numbers.
Reading RG and differential together
Bowlers often think in four rough combinations:
| Low differential | High differential | |
|---|---|---|
| Low RG | Revs early, smooth, controlled | Revs early, lots of flare, strong |
| High RG | Long, fairly straight, mild | Long, then a strong move downlane |
This grid is a simplification, but it is a useful way to compare balls. A strong ball for heavy oil often sits in the low-RG, high-differential corner, as we explain in what does a strong bowling ball mean?
Intermediate differential (asymmetric balls)
Asymmetric balls list a third number, intermediate differential, which measures how asymmetric the core is. A higher value usually means the ball responds more quickly to friction and gives the driller more ways to adjust the reaction with the layout. See symmetric vs asymmetric bowling balls.
Why the specs are only part of the story
- Specs are for the undrilled ball. Drilling removes mass and changes the ball’s RG and differential. The layout can increase or reduce flare compared with the box numbers. See pin up vs pin down.
- The cover usually matters more. Two balls with the same core numbers can react very differently with different covers or surfaces. See bowling ball coverstocks explained.
- Your release matters. Rev rate, speed and axis rotation affect how much of the core’s flare potential you actually use.
- Methods can vary. Manufacturers measure specs under their own processes, so small differences between brands may not be meaningful.
Using the numbers when shopping
- Use RG and differential to compare balls with similar covers, for example two solid reactive balls.
- Look for balls that differ from what you already own so your arsenal covers more conditions.
- Check specs for your weight, not just the headline figures.
- Ask your pro shop how they plan to drill the ball, since that changes the final dynamics.
For how these numbers fit with the rest of a ball’s construction, see our bowling ball anatomy guide.