If you watch experienced league bowlers, you’ll notice many of them switch balls for corner pins. That second ball is usually a plain-looking plastic ball, and it’s there for one reason: it goes where you aim it. This guide explains why polyester balls roll straighter, when they don’t, and how to pick a weight and fit that help your spares rather than hurt them.
What is a spare bowling ball?
A spare ball is a ball you use mainly for spares, especially single pins. It’s usually made with a polyester coverstock (often just called “plastic”). The goal is the opposite of a strike ball: instead of hooking hard into the pocket, it should travel on a predictable, mostly straight line.
That straight path removes a big variable. With a hooking ball, you have to predict how much it will curve on the part of the lane you’re using, and that can change during a session. With a ball that barely hooks, you pick a line and throw it. That’s why a straight spare ball pairs so well with the cross-lane approach described in our guide to picking up spares with alignment and the 3-6-9 system.
Why polyester goes (mostly) straight
Coverstock friction
The coverstock is the ball’s outer shell, and it’s the part that touches the lane. Reactive resin strike balls are designed to grip the lane, especially once they reach the drier back part. Polyester is a harder, smoother, lower-friction material. On an oiled lane it tends to skid along the surface rather than grab it, so even when the ball is spinning, it doesn’t convert much of that spin into hook.
Polyester balls usually come with a shiny, polished surface, which reduces friction further.
Simple cores
Most polyester balls have a simple, low-flare core (often a small “pancake” weight block) instead of the shaped cores in performance balls. Those shaped cores are part of what makes a strike ball rev up and change direction. A simple core contributes very little to hook, so the ball keeps rolling the way it was released.
Polyester vs urethane vs reactive resin
| Coverstock | Typical hook | Common use |
|---|---|---|
| Polyester (plastic) | Least | Spares, beginners, house balls |
| Urethane | Moderate, smooth and controllable | Strikes on shorter or drier patterns; some bowlers use it for certain spares |
| Reactive resin | Most | Strike balls on most modern conditions |
Most house balls at bowling centers are polyester for the same reason: they’re durable, inexpensive and behave consistently for casual bowlers. Polyester spare balls are also generally among the least expensive balls in a pro shop.
Can a polyester ball still hook?
Yes. “Straight” is relative. A polyester ball can still move a few boards, and sometimes more, especially when:
- The lane is dry. On the outside boards, or on lanes with little oil, even a low-friction ball finds some grip.
- You throw a lot of revs. A strong release puts more spin on the ball, and some of that will show up as hook even with plastic.
- Your hand turns around the ball at release. If you use your strike release with your spare ball, it will curve more than you expect.
- Ball speed is low. A slower ball spends more time on the lane, which gives it more time to react.
That last point answers a common question — “why does my bowling ball hook so much?” Usually it’s a mix of the ball’s coverstock, the lane’s dryness, your speed and how much your hand rotates at release.
How to keep a plastic ball straighter
- Put your hand behind the ball with your thumb toward the pins.
- Keep your wrist firm and limit rotation through the release.
- Finish with your palm facing up and your arm extending toward your target.
- Add a little speed if the ball still finishes early, as long as your accuracy holds.
- Shoot cross-lane so the ball crosses the oil in the middle of the lane rather than riding the dry outside boards.
Our spare drills include a short-approach drill for practicing this release.
What weight should your spare ball be?
Same weight as your strike ball
The most common advice is to use the same weight as your strike ball. Your timing, arm swing and footwork are tuned to that weight. Switching to a different weight for the second ball can change your speed and swing in ways that are hard to notice but easy to miss with, especially on corner pins.
Many coaches feel that keeping the weight the same is one of the simplest ways to keep spare shots consistent.
When a lighter spare ball makes sense
Some bowlers choose a spare ball one or two pounds lighter than their strike ball. Reasons include:
- Fatigue over a long league session or tournament.
- Shoulder, elbow or wrist discomfort, where a lighter ball feels better.
- Wanting a bit more ball speed on spares.
It can work, but it’s a trade-off. A lighter ball tends to come off the hand faster with the same swing, which can change your line. If you go lighter, practice with it enough that the difference feels normal. If pain is the reason, it’s worth talking with a coach or a medical professional rather than relying on equipment changes alone.
How much do bowling balls weigh, and is 12 pounds too light?
Bowling balls are commonly sold from about 6 pounds up to 16 pounds, and 16 pounds is the maximum allowed under USBC rules. Many adult bowlers use something in the 12–16 pound range.
A 12-pound ball isn’t automatically too light. A popular rule of thumb puts a good ball weight at around 10% of body weight, up to 16 pounds, but comfort and control matter more than any formula. The right weight is one you can swing smoothly and repeatably for a full session without muscling the ball. If you can do that comfortably with a heavier ball, the extra weight may help pin carry on strikes — but spare shooting is more about accuracy than force.
Grip and drilling
Your spare ball should feel as close to your strike ball as possible in your hand:
- Match the grip style. If your strike ball is drilled fingertip, have your spare ball drilled fingertip too. A conventional grip (like most house balls) feels different and can change your release.
- Match the span and hole sizes where your pro shop recommends it.
- Use the same thumb and finger inserts if you use them on your strike ball.
A well-fitted spare ball with the same grip as your strike ball usually beats a better-looking ball with a different fit.
Two-handed bowlers and spare balls
Two-handed bowling is now well established, and some of the best-known PBA players, such as Jason Belmonte, bowl with two hands. Two-handers generate a lot of revs, which makes a low-hook spare ball especially useful for corner pins. Some two-handers shoot spares with their normal two-handed style and a straighter release; others switch to a one-handed delivery for certain spares. There’s no single right approach — the key is choosing one and practicing it.
Do you actually need a spare ball?
Not always. If you throw a fairly straight ball already, or you’re newer to the game, you can shoot most spares with one ball by using a straighter release. A spare ball becomes more valuable when:
- You hook the ball a lot and keep missing corner pins.
- You bowl on different centers and lane conditions.
- You notice your strike ball reacting differently on the outside boards.
For many bowlers, a polyester spare ball is the most useful second ball they can buy. It’s inexpensive, it lasts, and it makes the single pins that decide many games — like the 10 pin and the 7 pin — a lot more predictable.