Drilling and Layouts

Fingertip vs Conventional Grip: Which Drilling Should You Choose?

Fingertip vs conventional bowling grips compared: finger depth, span, hook potential, control and comfort, plus who should switch and how to make the change.

On this page
  1. The Short Answer
  2. Conventional Grip
  3. Fingertip Grip
  4. Semi-Fingertip Grip
  5. Side-by-Side Comparison
  6. Which Should You Choose?
  7. Switching From Conventional to Fingertip
  8. Inserts and Thumb Slugs
  9. Does Fingertip Automatically Improve Your Scores?

The Short Answer

  • Conventional grip: the middle and ring fingers go in to the second knuckle. It’s secure and easy to control, and it’s how house balls are drilled. A good choice for beginners and casual bowlers.
  • Fingertip grip: the middle and ring fingers go in only to the first knuckle. It allows more revs and hook, and it’s the standard for most league and competitive bowlers who throw a hook.

In both grips, the thumb usually goes all the way in.

If you bowl a few times a year and roll the ball fairly straight, conventional is fine. If you bowl regularly and want to hook the ball, most coaches recommend moving to a fingertip drilling once your basic swing and release are consistent.

Conventional Grip

With a conventional grip:

  • Fingers go in to the second knuckle
  • The span is shorter, so your hand sits more compactly on the ball
  • The ball feels secure and easy to carry
  • Thumb and fingers tend to leave the ball at about the same time

Pros: a secure feel, good control, easy to learn, and what you’ll find on house balls.

Cons: harder to generate revs and hook. The ball sits deeper in your hand, so it’s harder to get the fingers to lift and rotate through release.

Fingertip Grip

With a fingertip grip:

  • Fingers go in only to the first knuckle
  • The span is longer, so your hand stretches more across the ball
  • The thumb exits first, leaving the ball on your fingertips for a moment at release
  • The fingers lift and rotate the ball as it comes off the hand, creating more revs

Pros: more rev and hook potential, a better ability to shape ball motion, and the grip most modern reactive balls and layouts are designed around. A good fingertip fit can also feel more comfortable on the hand than a poorly fitted conventional ball.

Cons: less secure at first, a learning curve, and the need for a custom drilling. A poorly fitted fingertip ball can strain the fingers.

Semi-Fingertip Grip

A semi-fingertip grip puts the fingers in between the first and second knuckles. It’s less common, but some bowlers use it:

  • As a transition step from conventional to fingertip
  • For extra security when they still want some extra lift
  • When hand flexibility or comfort makes a full fingertip span awkward

Side-by-Side Comparison

Conventional Fingertip
Finger depth Second knuckle First knuckle
Span Shorter Longer
Feel Very secure Less secure, more “on the fingers”
Rev and hook potential Lower Higher
Learning curve Easy Moderate
Typical bowler Beginners, casual, straight-ball League, competitive, hook bowlers
Where you see it House balls, beginner custom balls Most custom reactive balls

Which Should You Choose?

Choose conventional if:

  • You’re new to bowling or bowl only occasionally
  • You throw the ball fairly straight and like it that way
  • You have hand or finger issues that make a fingertip span uncomfortable (ask a pro shop or coach)

Choose fingertip if:

  • You bowl regularly, such as weekly league play
  • You want to throw a hook or increase your revs
  • Your swing and timing are already reasonably consistent
  • You’re buying a reactive ball and want it to perform as designed

When in doubt, talk to a pro shop operator or coach. They can watch your release and tell you whether you’re ready.

Switching From Conventional to Fingertip

A few things to know before you switch:

  1. It means a new drilling. The span and pitches are different, so a conventional ball has to be plugged and redrilled, or you need a new ball. See plugging and redrilling a bowling ball and our guide to bowling ball drilling costs.
  2. Expect an adjustment period. The ball will feel less secure at first. Many bowlers find their accuracy dips for a while.
  3. Don’t over-grip. A common mistake is squeezing with the fingertips to compensate. A good fit should let you hold the ball with light pressure. See how your hand should fit a bowling ball.
  4. Watch for soreness. Some finger soreness is normal at first. Sharp or lasting pain isn’t, so have the fit checked.
  5. Your PAP may change. A new grip often changes your release. If you’re planning a specific layout, have your positive axis point measured after the switch.

Inserts and Thumb Slugs

Fingertip drillings often use finger inserts (rubber or urethane sleeves in the finger holes) and sometimes a thumb slug (a pre-made thumb insert). They give a consistent feel across balls, can be replaced as they wear, and can make small fit changes easier. They’re optional, and many bowlers like them. Pitch matters here too. See our guide to forward, reverse and lateral pitch.

Does Fingertip Automatically Improve Your Scores?

No. A fingertip grip gives you more potential for revs and hook, but it doesn’t guarantee higher scores. Accuracy, spare shooting and consistency matter much more for most bowlers. A well-fitted conventional ball thrown accurately will usually outscore a fingertip ball thrown erratically.

The fingertip grip is a tool. It’s worth adopting once you’re ready to use what it offers, and it works best paired with a good fit and a sensible layout. See our guide to bowling ball drilling layouts for the next step.

The complete guide to drilling and layouts

Bowling Ball Drilling Layouts: Pin Placement and Hole Positions Explained
Read the guide

Keep exploring

Guides from other topics

All topics →