Lanes and Machines

String Pinsetters: How Pins on Strings Change Bowling

Why bowling pins are attached to strings, how string pinsetters work, how they change pin action and scoring, and where USBC and the PBA stand on them.

On this page
  1. How a string pinsetter works
  2. Why bowling centers are switching
  3. Do string pins affect bowling?
  4. Are string pinsetters allowed in leagues and tournaments?
  5. String pins and the PBA
  6. Common string pinsetter problems
  7. How much do string pinsetters cost?
  8. Tips for bowling on string machines

If you’ve walked into a bowling center lately and noticed thin cords running from the top of each pin up into the machine, you’re bowling on a string pinsetter. These machines have been common for decades in five-pin bowling, in European nine-pin and in small entertainment venues. Since the early 2020s they’ve spread into traditional ten-pin centers too, and that has started one of the bigger arguments in modern bowling.

How a string pinsetter works

Each pin has a cord attached to the top of its head. The cords run up to a mechanism above the pin deck. After each ball:

  1. The machine senses that the ball has arrived and pins have moved.
  2. It reels all ten pins up off the deck on their strings.
  3. It lowers the pins that were still standing back onto their spots. After a second ball or a strike, it lowers all ten for a fresh rack.

There’s no setting table gripping pins, no pin elevator and no turret, because the pins never leave their strings. The ball still drops into the pit and goes back through the ball return. For comparison, see how traditional free-fall pinsetters work.

String machines also know which pins fell by tracking each string, so they can report pinfall to the scoring system without a separate pin-reading camera.

Why bowling centers are switching

The main reason is cost. Free-fall machines have a lot of moving parts and usually need a skilled mechanic on site. Many of the machines still running are decades old, and parts and qualified mechanics are getting harder to find.

String machines are mechanically much simpler. Manufacturers claim big savings. Brunswick, for example, says its Boost ST string pinsetter has about 80% fewer parts than a free-fall machine and uses over 70% less energy. Treat vendor figures as best-case numbers, but the direction is not in dispute: string machines are generally cheaper to run and maintain.

Do string pins affect bowling?

Yes, to some degree. How much it matters depends on who you ask.

What changes in pin action

On a free-fall machine, pins fly freely after impact, bounce off the kickbacks and side walls, and roll around the deck before falling into the pit. Some strikes depend on that chaos, like a pin skidding across the deck to take out a corner pin (often called a messenger).

On a string machine, the cord limits how far and how freely each pin can travel. Pins can still fall and knock each other down, but:

  • Pins can’t fly as far, so some late “messenger” strikes don’t happen.
  • Strings can sometimes drag across or tangle with other pins, occasionally knocking a pin over or holding one up.
  • Pins that fall tend to stay closer to their spots.

Many experienced bowlers say string pins feel and sound different, particularly on light pocket hits and corner pins. Casual bowlers often don’t notice much.

What the research says

The United States Bowling Congress (USBC) has studied string pinsetters in its lab and in league settings. Its 2023 research reported a lower strike percentage on string machines than on free-fall machines. The figure commonly cited from the lab testing is about 7% lower. USBC has also said that bowlers’ averages tend to be somewhat lower on string machines.

Exact figures vary by study, machine and string length. Newer machines use longer strings, which manufacturers say gives pin action closer to free-fall.

Are string pinsetters allowed in leagues and tournaments?

In April 2023, USBC announced it would certify string pinsetters as an independent category of equipment and competition, starting August 1, 2023. In practice:

  • Leagues and tournaments can be USBC-certified on string machines.
  • USBC set specifications for certified string machines, including requirements on string length, meant to keep pin action closer to free-fall.
  • USBC has recommended recording which type of machine a score was bowled on so it can keep monitoring the difference.

If an average or an award matters to you, check with your league secretary or your local USBC association on how string-pin scores are handled.

String pins and the PBA

The Professional Bowlers Association has also looked at string machines. In late 2024 it published a string pin report on its own testing, and string pinsetters have been used at some PBA events. That has been controversial with fans and players who see free-fall pin action as part of the sport, while others argue that the economics leave centers little choice.

Policies are still changing, so check the PBA’s current announcements for which events, if any, use string machines in a given season.

Common string pinsetter problems

String machines aren’t trouble-free:

  • Tangled strings are the most common stoppage. Newer machines include automatic detangling routines.
  • Worn or broken strings have to be replaced from time to time.
  • Pins hanging slightly off spot after a reset can happen if strings twist.

Most of these are quicker to fix than a free-fall jam, which is part of the appeal for centers.

How much do string pinsetters cost?

Prices depend on the brand, whether you’re buying for a commercial center or a home, and how many lanes are involved. String machines are generally cheaper to buy and install than new free-fall machines. Commercial-grade units from major manufacturers still cost well into the thousands of dollars per lane, often more. For a fuller breakdown, see how much a pinsetter machine costs. If you’re planning a private lane, the home bowling lane guide explains why string machines are often the default choice for homes.

Tips for bowling on string machines

You don’t need to reinvent your game, but a few adjustments can help:

  • Prioritize the pocket. Since fewer messy hits carry, accurate entry into the pocket matters more.
  • Don’t count on messengers. Shoot spares as if the corner pin will stay up.
  • Expect your average to dip slightly. Many bowlers find their scores settle back once they adjust.
  • Report tangles quickly. If a string looks twisted or a pin is off spot, ask for a reset before you throw.

The complete guide to lanes and machines

How a Bowling Alley Works: Lanes, Pins, Pinsetters and More
Read the guide

Keep exploring

Guides from other topics

All topics →