Drilling and Layouts

Bowling Ball Pitches Explained: Forward, Reverse and Lateral Pitch

What forward, reverse and lateral pitch mean in bowling ball fit, how pitch is measured, how it changes grip and release, and signs your pitches need adjusting.

On this page
  1. What Pitch Is
  2. Neutral (Zero) Pitch
  3. Forward Pitch
  4. Reverse Pitch
  5. Lateral Pitch
  6. Thumb Pitch vs Finger Pitch
  7. How Pitch Is Measured
  8. What Determines Your Pitches
  9. Signs Your Pitch May Be Off
  10. Pitch, Span and Grip Style

What Pitch Is

Pitch is the angle at which a thumb or finger hole is drilled into the ball. A hole can point straight at the ball’s center, or it can be angled slightly in one direction.

Pitch is a fit setting, like span and hole size. It doesn’t change the ball’s core reaction. It changes how the holes hold your hand and how easily your thumb and fingers come out at release. It’s a big part of why a custom-fitted ball feels so different from a house ball. For the full picture of ball fit, see how your hand should fit a bowling ball.

Neutral (Zero) Pitch

A hole with zero pitch points directly toward the center of the ball. Every other pitch is described as how far, and in which direction, the hole is angled away from that neutral line.

Forward Pitch

Forward pitch angles the hole toward the palm, toward the center of your grip.

  • On finger holes, forward pitch helps the fingers grip. It can reduce how hard you have to squeeze.
  • On the thumb hole, forward pitch adds grip on the thumb but makes it slower to release. Too much can make the thumb hang.

Forward pitch is often used for bowlers who need a bit more hold, such as bowlers with less hand strength or less flexible fingers.

Reverse Pitch

Reverse pitch angles the hole away from the palm.

  • On finger holes, reverse pitch reduces grip but allows a cleaner, earlier finger release. It’s often used for bowlers with very flexible fingers, or whose fingers are being squeezed or pinched.
  • On the thumb hole, reverse pitch helps the thumb come out freely. It’s often used to fix a thumb that hangs or sticks. Too much can make the ball feel like it’s slipping off.

Lateral Pitch

Lateral pitch angles the hole left or right rather than toward or away from the palm. It matches the natural angle at which your thumb and fingers bend when your hand is on the ball.

  • Lateral thumb pitch affects whether the thumb exits cleanly. If it’s off, the thumb may rub on one side of the hole, and you may get soreness or calluses on one side of your thumb.
  • Lateral finger pitch can help the fingers sit naturally in the holes and leave them comfortably, especially for bowlers with fingers that angle noticeably.

Direction terms (“toward” or “away from” the palm, or “right” and “left”) depend on the hand and on the shop’s convention, so ask your driller to explain their notation.

Thumb Pitch vs Finger Pitch

The thumb and fingers do different jobs, so their pitches are chosen differently:

Hole Main job Pitch is used to…
Thumb Support the ball, then leave first (in a fingertip grip) Release cleanly without squeezing, and avoid hanging
Fingers Carry the ball through release and impart rotation Hold securely with low effort, and release smoothly

In many fingertip drillings, the thumb hole is set up for a clean, easy exit, and the finger holes are set up for secure hold. Your driller will balance both against your hand.

How Pitch Is Measured

You’ll see pitch written two ways:

  • In inches: the older method, based on how far the hole’s angle is offset at the ball’s center.
  • In degrees: the angle of the hole relative to neutral. Many modern pro shops and drill jigs use degrees.

The two describe the same thing in different units, and conversions between them depend on the ball’s size. If you’re comparing specs between shops, make sure you know which units each is using.

What Determines Your Pitches

Drillers usually consider:

  • Flexibility: more flexible fingers and thumbs often need less forward pitch, or some reverse pitch. Less flexible hands often need more forward pitch.
  • Span: span and pitch work together. Changing one can make the other feel different.
  • Thumb shape and swelling: if your thumb swells during a session, the driller may favor a pitch that keeps it from sticking as it gets bigger.
  • Grip style: fingertip, conventional and semi-fingertip grips load the fingers differently.
  • Release: how you rotate your hand, and how fast your thumb comes out, affect the pitch that suits you.

Pitch is personal. Two bowlers with the same span can need quite different pitches.

Signs Your Pitch May Be Off

Symptom Possible pitch issue
Thumb hangs or sticks at release Too much forward thumb pitch, or lateral thumb pitch off
Ball feels like it’s falling off your hand Too much reverse pitch
You squeeze hard to hold the ball Not enough forward pitch, or holes too big
Pinched or sore fingertips Finger pitch fighting your flexibility
Soreness on one side of the thumb Lateral thumb pitch off

Fit issues often have more than one cause. Hole size and span can produce the same symptoms, so let a pro shop diagnose the problem rather than guessing. Small changes (inserts, thumb tape, or a slight re-angle when a ball is redrilled) are often enough.

Pitch, Span and Grip Style

If you switch from conventional to fingertip, your span gets longer, and your pitches usually need to change too. That’s one reason a conventional ball can’t simply be re-measured for fingertip without redrilling. If you’re weighing that switch, see fingertip vs conventional grip. If you’re refitting an existing ball, see plugging and redrilling a bowling ball.

The complete guide to drilling and layouts

Bowling Ball Drilling Layouts: Pin Placement and Hole Positions Explained
Read the guide

Keep exploring

Guides from other topics

All topics →