Every bowling lane carries a thin, carefully placed layer of oil, and nobody puts it there by hand anymore. A lane conditioning machine, usually just called a lane machine, cleans the old oil off and lays down a new pattern in one trip down the lane. Separately, lane certification checks that the lane itself is the right size and flat enough for scores to count in sanctioned play.
This article covers both.
What a lane conditioning machine does
A lane machine is a self-propelled unit about the width of a lane. An operator sets it on the approach, starts it, and it travels to the pin deck and back on its own. On that trip it typically:
- Cleans the lane by spraying a cleaning solution and wiping it up
- Vacuums away the dirty solution and old oil
- Applies fresh lane conditioner in a programmed pattern
- Buffs the oil with a rotating brush to spread and blend it
Some machines are clean-only or oil-only, but most centers use combination machines that do both in one run.
Inside one pass down the lane
Exact sequences vary by model, but a typical combination run looks like this:
- Forward trip (toward the pins). The machine cleans the lane surface ahead of it and starts laying down oil from the foul line outward. The oil is applied to selected boards according to the program.
- At the end of the oil pattern, the machine stops applying oil but usually keeps cleaning to the end of the lane so the back end is left dry.
- Return trip (toward the foul line). Many patterns add more oil on the way back, called reverse oil, and the brush keeps buffing.
The result is a pattern with a set length, a set amount of oil, and a set shape across the 39 boards. That’s what you see summarized on a pattern sheet. To make sense of one, see how to read a bowling lane oil pattern graph.
How oil is applied: wicks, brushes and injectors
Lane machines have used a few methods over the years:
- Wick and transfer systems: older machines soak a wick or roller in oil and transfer it to a buffer brush, which puts it on the lane. They’re simple, but output can drift as wicks wear.
- Metered injector or spray systems: most current high-end machines push a measured amount of oil through small nozzles or injectors onto specific boards. This allows much finer control over where oil goes.
Lane oil itself is mostly mineral oil with additives. Different oils have different viscosities (thickness), and a thicker oil generally holds up longer but makes balls slow down and hook earlier.
Programming an oil pattern
On a modern machine, an operator programs or selects:
- Pattern length: how far down the lane oil is applied, in feet
- Loads: how much oil goes on which boards at which distances, often described in “units” of oil
- Forward and reverse oil: how much is applied on each trip
- Buffer settings: how the brush spreads oil past the end of the loads
Centers keep a house shot for daily play and may load tougher sport patterns such as the PBA animal patterns for tournaments and sport leagues.
How often lanes are conditioned
There’s no single rule, but many centers condition lanes at least once a day and again before league sessions. Oil moves and wears off as balls are rolled. That process, carrydown and breakdown, means a busy lane can play very differently after a few hours. Tournaments often re-oil between squads.
Who makes lane machines
The major lane machine brands include Kegel, Brunswick and QubicaAMF, and Kegel is particularly associated with lane machines and oil pattern research. Machines range from simple models for small centers or home lanes to fully automated units that can move from lane to lane with minimal handling. A computerized machine is a significant purchase. One home bowling installer lists an automatic lane machine at around $16,500, and commercial units can cost more.
What lane certification is
In the United States, the United States Bowling Congress (USBC) certifies bowling lanes. For scores bowled in USBC-certified leagues and tournaments to count, and for awards like 300 games to be recognized, the lanes must meet USBC specifications. Inspections are typically carried out by trained volunteers from the local USBC association, usually on a yearly cycle.
Other countries have their own governing bodies, generally working from World Bowling specifications.
What certification inspectors measure
Inspectors check that each lane is within USBC tolerances. Among the main items:
- Length: 60 feet from the foul line to the center of the 1-pin spot
- Width: about 41.5 inches, within a small tolerance
- Levelness and depressions: the lane surface can’t have dips beyond a very small tolerance, measured in thousandths of an inch
- Gutters (channels): correct width, depth and shape
- Pin spots: correct position and spacing on the pin deck
- Approach, foul line and markings: correct dimensions and positions
- Kickbacks, pit and related back-end measurements
The full list and the exact tolerances are in USBC’s Equipment Specifications and Certifications Manual, which proprietors and inspectors should treat as the authority.
Lane certification tools
Inspectors use precise measuring equipment rather than tape measures and eyeballing. Typical tools include:
- Straightedges and feeler gauges to find dips and crowns across the lane
- Lane levels and gauges, including tools built for measuring across a lane’s width and tilt
- Steel tapes and measuring jigs for length, width and pin-spot positions
- Gutter gauges to check channel dimensions
Centers that host higher-level events sometimes go further with lane topography measurement: detailed mapping of the surface’s ups and downs, which can affect ball motion even within certification limits.
Oil rules for certified play
Certification isn’t only about the lane’s shape. USBC also has rules about oil. For certified competition, a minimum amount of oil is required on every board across the width of the lane for the length of the pattern. Lanes can’t be left completely dry on the outside to create an extreme guide. USBC’s sport bowling program adds a limit on the ratio between center and outside oil. See what a house shot is for how that compares with typical league conditions.
For how the oil pattern fits into the rest of the alley, see our overview of how a bowling alley works.