The short answer
Most modern bowling centers use a camera mounted above or in front of the pin deck, usually hidden in or behind the masking unit. After your ball goes through, a sensor tells the system the ball has passed. The system waits briefly for the pins to settle, takes an image of the pin deck, and checks which of the ten pin positions still has a pin standing. Then it sends that count to the scoring computer.
Older or different systems detect pins through the pinsetter itself, either with sensors in the setting table or, on string machines, by tracking each pin’s string.
Step by step: from ball to score
On a typical camera-based system:
- Ball detection. A sensor, often a photoelectric beam near the pin deck or in the pit, detects the ball passing. This tells the system a delivery has been made and starts the timing.
- Settle time. The system waits a moment for pins to stop moving. A pin that’s still wobbling might fall, or it might not.
- Image capture. The camera captures the pin deck.
- Pin reading. Software checks each of the ten pin spots and decides whether a pin is standing there.
- Score update. The result goes to the scoring computer, which updates the frame on the overhead monitor. It also works out strikes, spares and running totals.
- Pinsetter cycle. Meanwhile the pinsetter cycles: it sweeps deadwood and respots standing pins after a first ball, or sets a new rack.
The foul line sensor feeds into the same system, so a foul can be marked automatically.
Camera-based pin detection
Camera systems work because the pin deck is a controlled scene: ten known positions, white pins and a consistent background. The software is set up to know where each pin spot is in the image. It looks for the shape or brightness of a standing pin at each spot.
Benefits:
- Works with most pinsetters, so a center can upgrade its scoring without replacing machines
- No contact with pins, so nothing wears out from touching them
- Can show the leave on screen, sometimes with a live or recorded image of the pins
Camera systems need good, consistent lighting on the pin deck and a clean lens. They also have to be calibrated so each pin spot is in the right place in the image.
Mechanical and table-based detection
Before cameras became standard, pinsetters often detected pins mechanically:
- On older AMF machines, when the setting table came down after the first ball, the cells that closed around standing pins completed electrical circuits. Those circuits lit a “pindicator” display showing which pins were left, and later fed early electronic scoring systems.
- Some Brunswick GS-series machines lower the table on every cycle as part of reading standing pins.
These systems still work, but most centers now pair their machines with camera-based scoring.
How string pinsetters detect pins
On a string pinsetter, each pin is connected to its own cord. When a pin falls or is knocked off its spot, its string moves. The machine senses this and knows which pins are down without needing a camera. That’s one reason string machines can integrate closely with scoring systems.
How ball speed is measured
Many scoring systems show your ball speed. It’s usually calculated by timing the ball between two points with known positions. Typically one sensor is near the foul line and another further down the lane or at the pin deck. Speed equals distance divided by time.
Because systems measure at different points, ball speed readings can differ from one center to another, and from more precise tracking tools. USBC has used much more detailed tracking for research, including on-lane sensors in its older C.A.T.S. system and a multi-camera system called B.O.L.T.S. that tracks the ball’s path down the whole lane.
Why the scoring system gets it wrong sometimes
Automatic scoring is very reliable, but mistakes happen. Common causes:
- A wobbling pin that the camera reads as standing just before it falls, or as fallen just before it settles upright
- Off-spot pins: a pin knocked partway off its spot but still standing may be missed
- Deadwood lying on the deck that the camera mistakes for a standing pin
- Lighting changes, glare, or a dirty or misaligned camera
- Two balls in quick succession, or a ball the sensor didn’t detect, throwing off the frame count
- A pinsetter malfunction that knocks pins over during its cycle
How score corrections work
If your score is wrong:
- In open play, many centers let you correct pinfall from the lane console or touchscreen, depending on the system and how the center has set it up. If not, ask the front desk.
- In league or tournament play, tell your opponents and league or tournament officials right away, before the next ball is thrown if possible, and follow your league’s rules for scoring corrections. Centers may restrict console corrections during certified play.
Who makes bowling scoring systems
Bowling scoring systems are mostly supplied by the same companies that make pinsetters and lanes. They include Brunswick (whose systems include Sync), QubicaAMF (including BES X) and other makers such as Steltronic. Most current systems combine scoring with lane control, bumper and foul settings, games and entertainment features, and front-desk management.
For how scoring fits with the rest of the center’s equipment, see our overview of how a bowling alley works.