Lanes and Machines

Oil Carrydown and Lane Transition: How Lanes Change During Play

Why bowling lanes change as you bowl: how oil breakdown and carrydown work, what speeds them up, how to spot transition, and how to adjust your line and ball.

On this page
  1. Lanes never stay the same
  2. Breakdown: where oil disappears
  3. Carrydown: where oil goes
  4. What affects how fast lanes transition
  5. How to tell the lanes are changing
  6. How to adjust to transition
  7. Why centers re-oil

Lanes never stay the same

When a lane machine finishes oiling a lane, the pattern matches what’s on the sheet. As soon as people start bowling, it begins to change. Each ball picks up a little oil, pushes some of it further down the lane, and spreads some sideways.

This is lane transition. It’s why a line that worked perfectly in the first game can leave you in the wrong place by the third. Transition has two main parts: breakdown and carrydown.

Breakdown: where oil disappears

Breakdown is the loss of oil in the parts of the lane where balls travel most. Each ball absorbs or wipes off a little oil as it rolls. Modern reactive resin balls are especially absorbent.

The result is a drier area along the most-used path, often called the track. For right-handers on a typical house shot, the track is often somewhere around the 8 to 12 boards. Left-handers usually have their own track on the other side, which often stays fresher.

When the track dries out, your ball grips earlier and hooks sooner and harder. A shot that used to hit the pocket starts going high, or crossing over to the other side of the head pin.

Some bowlers call a heavily broken-down area burn, as in “the lanes are burning up.”

Carrydown: where oil goes

Carrydown is oil being pushed or carried past the end of the original pattern into the back end, the dry part of the lane near the pins. Some of the oil a ball picks up in the front gets deposited further down the lane.

Over time the back end becomes slicker. Your ball then:

  • Skids further before it hooks
  • Hooks less sharply at the breakpoint
  • Can push past the pocket instead of driving into it, leaving pins like the 10 pin (for right-handers) or weak hits

Carrydown and breakdown happen together. The front of the lane and the track get drier while the back end gets slicker, and both changes affect ball motion.

What affects how fast lanes transition

Transition speed varies a lot. The main factors:

  • Number of games and bowlers. More balls means more change. A pair shared by five bowlers each for three games will transition far more than a lightly used lane.
  • Ball type. Plastic (polyester) balls don’t absorb much oil, so they tend to carry oil down the lane and are often blamed for carrydown. Reactive resin balls absorb more oil and speed up breakdown in the track.
  • Ball surface. Sanded, dull surfaces grab and move more oil. Polished surfaces skid through more easily.
  • Pattern length and volume. Short or light patterns can break down quickly. Heavy patterns take longer to change.
  • Oil type and lane surface. Different lane oils and surfaces hold up differently. Temperature and humidity also play a part.
  • Where everyone plays. If most bowlers on a pair use the same part of the lane, that area changes fast.

How to tell the lanes are changing

Watch for these signs:

  • Your ball starts hooking earlier than in the first game, even though you’re hitting your target. That points to breakdown in the track.
  • High hits and splits like the 4-6 or 4-9 start showing up on shots that used to be good.
  • Your ball starts skidding past the breakpoint or hitting light, which points to carrydown in the back end.
  • Other bowlers on the pair are moving, especially those who play a similar line to you.

How to adjust to transition

There’s no single fix, but common adjustments include:

  • Move your feet and target in the same direction. When the track dries out and your ball hooks early, many bowlers move both their feet and their target deeper toward the middle, often by a couple of boards at a time. That puts the ball in fresher oil. A common rule of thumb is to move your feet more than your target.
  • Change your ball. Switching to a ball with a weaker or smoother reaction, or a shinier surface, can help when the front of the lane dries out. If carrydown is making the back end slick, a stronger or more angular ball may help.
  • Adjust speed. A little more speed can help a ball that’s hooking too early. Slowing slightly can help a ball that’s skidding through carrydown.
  • Change your release if you can repeat it consistently, for example by taking a little rotation off the ball.
  • Watch spares. As lanes change, a straight plastic ball for spares becomes even more useful.

Small adjustments made early usually work better than big moves made after several bad frames.

Why centers re-oil

Because transition changes lanes so much, centers usually clean and re-oil before leagues, and tournaments often re-oil between squads. That gives everyone a similar starting condition. Even then, the lane will start changing again with the first ball.

To understand the starting pattern, see how to read a bowling lane oil pattern graph. For tougher patterns that transition differently, see PBA oil patterns explained.

The complete guide to lanes and machines

How a Bowling Alley Works: Lanes, Pins, Pinsetters and More
Read the guide

Keep exploring

Guides from other topics

All topics →