The machine that sends your bowling ball back to you is called the ball return. It picks the ball up from the pit behind the pins, rolls it back under the lane, and pushes it up onto the rack beside the approach.
The large machine behind the pins that clears and resets them is a different machine, the pinsetter (or pinspotter, on AMF equipment). The two work together: the pinsetter separates your ball from the pins and hands it off to the ball return.
The ball return: how your ball comes back
A ball return has three main parts.
Ball lift vs ball accelerator
After the ball drops into the pit, it has to be raised and pushed onto the return track. Machines do this in one of two ways:
- Ball lift: on AMF pinspotters, the ball is carried by the pit conveyor to the side of the machine, where a lift raises it to the height of the return track. From there it rolls back toward the bowlers.
- Ball accelerator: on many Brunswick machines, the ball is moved onto a track where a fast-moving belt or set of wheels shoots it under the lanes toward the front.
The track and the rack
The return track usually runs under the lanes, between each pair of lanes, which is why two lanes share one ball return. Near the approach, the ball is pushed back up to floor level and rolls out under a cover called the hood onto the rack, where it waits for you.
Some very old centers and small amusement lanes use above-lane tracks, where you can watch the ball roll back along a rail.
The pinsetter: the big machine behind the pins
If you meant the big machine at the end of the lane, that’s the pinsetter. It:
- Clears fallen pins with a sweep bar
- Lifts standing pins after your first ball and puts them back
- Sets a full rack of ten for each new frame
- Separates the ball from the pins in the pit and passes the ball to the return
For the details, see how bowling pinsetters work and our guide to string pinsetters, which reset pins on cords instead.
Other “bowling ball machines” you might mean
A few other machines show up in bowling centers and pro shops:
- Drill press / ball drilling jig: used in pro shops to drill finger and thumb holes to fit your hand
- Ball spinner or resurfacing machine: spins the ball while staff sand or polish its surface to change how it grips the lane
- Ball cleaner: a machine at some centers that cleans oil off balls
- Lane machine: not a ball machine at all, but the robot that cleans and oils the lanes; see lane conditioning machines
Why your ball sometimes doesn’t come back
If your ball doesn’t come back after a minute or so, the usual causes are:
- Ball stuck in the pit, often wedged against pins or the cushion, so it never reached the lift
- Pinsetter stopped mid-cycle because of a pin jam, which can hold the ball in the machine
- Ball jam in the return track, sometimes caused by two balls arriving close together
Press the call or reset button at your console if there is one, or tell the front desk. Never walk down the lane to look for it. The lane is oiled and slippery, and the pinsetter is dangerous.
Ball return safety
The ball return pushes heavy balls up with real force. Keep your hands away from the hood opening while a ball is coming up, and pick your ball up from the sides rather than putting your fingers between two balls on the rack, where they can easily get pinched.
For how the ball return fits into the rest of the center, see our overview of how a bowling alley works.