What are the grooves on the side of a bowling lane?
The long grooves running along both sides of a bowling lane are gutters. Official rule books call them channels. Each gutter is a rounded trough, roughly 9 inches wide, that runs from the foul line to the pin deck. It catches any ball that rolls off the edge of the lane.
Gutters are shaped and sized to strict specifications in certified lanes. They’re part of what USBC inspectors check during lane certification. Between pairs of lanes and along the outer edge of each gutter is a raised strip called capping, which separates one lane from the next.
What happens when your ball goes in the gutter
Once a ball drops into the gutter it’s committed. The curved shape keeps it there all the way to the pit, so it can’t hit the standing pins.
In scoring:
- A gutter ball usually knocks down no pins, and the scoring screen shows a dash (–) or a “G” for that roll.
- If a ball leaves the lane and then bounces back out of the gutter to hit pins, those pins generally do not count under standard rules. Pins knocked down by a ball that has left the lane are not legal pinfall.
- A ball that goes in the gutter is still a delivery. It uses up that roll of the frame.
For the full layout of what lines the lane, see our overview of how a bowling alley works.
What are bumpers?
Bumpers are barriers placed along or over the gutters so a ball can’t fall in. Instead of dropping into the gutter, the ball bounces off the bumper and stays on the lane. They’re meant for children, first-time bowlers and bowlers with disabilities. Many centers also put them up for birthday parties and casual groups.
People also call them gutter guards, gutter blockers, bumper rails or “bumper bowling.”
Types of bumpers
Bumpers have changed a lot over the years:
- Inflatable or tube bumpers: early versions were long padded tubes or inflated sleeves laid in the gutters. They worked but had to be set up and removed by hand.
- Manual rail bumpers: rigid rails mounted in or beside the gutter that staff flip up or lower by hand. Brunswick’s BankShot rails are one example of a manual bumper system.
- Automatic (retractable) bumpers: motorized rails built into the gutter area or capping that rise and lower on command. Most modern centers use these.
How automatic bumpers work
Automatic bumpers are connected to the center’s scoring system. When bowlers are entered for a game, each one can be set to bumpers on or bumpers off. Then:
- When it’s a bumpers-on bowler’s turn, the system raises the rails along both gutters.
- When the next bowler is set to bumpers off, the rails drop flush so the gutters are open.
- The switch happens automatically between turns, so a family can mix kids using bumpers with adults who aren’t.
The rails are driven by small motors or actuators along the length of the lane. They’re usually controlled from the scoring console or the front desk, and they sometimes run on a timer that matches the pinsetter cycle.
If the bumpers don’t rise for the right person, it’s usually a setting in the scoring system, not a mechanical fault. Ask the desk to check that bowler’s profile.
Do bumpers count in scoring?
On a bumper lane, pins knocked down after the ball bounces off a bumper are scored normally by the automatic system. Bumper games aren’t eligible for certified league or tournament play, though, and averages bowled with bumpers don’t count toward USBC records. Some youth programs use bumpers only in their very youngest divisions.
Bumpers for kids and beginners: help or crutch?
There’s an ongoing debate:
- For bumpers: young children often can’t roll a ball hard or straight enough to reach the pins. Bumpers stop the frustration of gutter after gutter, keep kids interested, and let them see pins fall. Some coaches say adult beginners relax and roll better with bumpers up for a few games.
- Against relying on them too long: bumpers can let a bowler throw at the rails on purpose and never learn to aim. A ball that ricochets into the pins doesn’t teach the line a real shot would take.
A reasonable approach is to use bumpers while a child or beginner is learning to roll the ball smoothly. Then try a game without them once they can usually keep the ball on the lane. Lighter balls, ball ramps for small children, and aiming at the arrows all help with the transition.
Asking for bumpers at a bowling center
Most centers offer bumpers at no extra charge. Ask at the desk when you check in, or tell staff which bowlers need them. If you’re bowling in a busy league house, bumper lanes may only be available on certain lanes or at certain times.